Chapter 9
1 Selection number label
● Printer documentation: For a list of print cartridge selection numbers, see the
reference guide that came with the printer.
● HP Inkjet Toolbox: Open the HP Inkjet Toolbox and then select the Supplies
panel.
Ink-backup mode
The printer can operate with only one print cartridge installed. For more information, see
the
ink-backup mode section.
Installation instructions
Follow these steps to install a print cartridge:
1 Verify that the printer is turned on.
2 Load Letter or A4 plain, white paper in the In tray.
3 Open the printer cover.
4 Wait until the print cartridge cradle moves to the right side of the printer and is idle
and quiet.
5 Press down on the print cartridge, and then slide it out of the print cartridge cradle.
6 Remove the replacement print cartridge from its packaging and carefully remove
the plastic tape.
HP Deskjet 5700 Series 62
To Next Page
Loading...