Use Microsoft Internet Explorer 5.0 or higher or Netscape 4.75 or higher.
4. Enter the printer's URL in the address box, then press Enter.
If you still cannot open the printer's internal web page with the printer, then
reset it to its factory
default configuration.
The printer cannot be detected during software installation
Follow these steps if the printer cannot be detected during the software installation:
1. Print a
network configuration page.
2. Find the printer's IP Address (item 7 on the configuration page).
3. On the Identify Printer panel of the software installer, select Specify a printer by
address, then click Next.
4. On the Specify Printer panel of the software installer, select IP Address.
5. Enter the printer's IP Address in the IP Address box, then click OK.
6. Follow the onscreen instructions to complete the installation.
To Next Page
Loading...