printer is not printing
verify the following
● The printer is connected to the power source.
● The cable connections are secure.
● The printer is turned on.
● The media is correctly placed in the In tray or lower tray.
● The printer's top cover is closed.
● The duplexer or Rear Access Door is attached.
● The print cartridges are correctly installed. For installation instructions, see
replacing print cartridges.
check the printer lights
● If the Power light is blinking, the printer is in the process of printing.
● If the Resume light is blinking, press the Resume button.
● If the Print Cartridge Status light is blinking, see checking the print
cartridge status.
● If all lights are blinking, see all lights are flashing.
select a topic below
If the printer still does not print, select the topic below that best describes the
problem:
● paper problems
● printer does not turn on
● printer does not turn on
● USB problems
● printer driver not found in Mac OS X Classic
To Next Page
Loading...