4
For each print cartridge, lift the green cradle latch.
Push the cartridge firmly down into the cradle and close
the latch.
You will hear a click, and the cartridges will sit firmly
in the cradles. You must insert both cartridges for the
printer to operate.
5
Close the printer cover.
The print cartridge light continues to blink for a few
seconds and then goes off. (You’ll hear the cartridges
return to their home position on the right side of the
printer.)
Black print cartridge
Color print cartridge
Cradle latch
Cartridge cradles
Print cartridge
light (blinking)
If the print cartridge
light
continues
to blink, take out both
cartridges and reinsert
them.
SetupGuide Page 7 Friday, July 25, 1997 1:13 PM
To Next Page
Loading...