4
3
Put the paper in the IN drawer, print side down.
Push the paper in toward the back of the paper drawer until it stops.
4
Slide the paper adjusters in so they fit snugly against the edges of
the paper.
Make sure the paper still lies flat in the drawer and that the paper fits
easily under the tab of the paper-length adjuster. (See page 28 for
more information if you’re loading small-sized paper.)
5
Push the paper drawer back in and flip the OUT tray back down.
IN drawer
Paper Pointers
PRINTSIDE DOWN
Most paper prints
better on one side
than on the other. This
is especially true for
coated or specially
treated paper. The
print side is usually
indicated on the
paper package.
P
RINTING ZONE
Your printer can’t print
right to the edge of the
paper. Be sure to set
the margins so that
the document falls
within the printable
area, or part of it could
be cut off. For details,
see page 48.
To Next Page
Loading...