Hardware options installation 56
4.
Open the expansion board retainer, and then remove the expansion slot cover.
5. Install the expansion board.
6. Install the shipping screw, if necessary. For more information, see "Securing an expansion board for
shipping (on page 56)."
7. Close the expansion slot retainer.
8. Connect any required internal or external cables to the expansion board.
9. Install the access panel.
10. Power up the server (on page 25, "Powering up and configuring the server" on page 34).
11. Resume normal server operations.
Securing an expansion board for shipping
To Next Page
Loading...
