Component identification 14
System maintenance switch
The system maintenance switch (SW5) is an ten-position switch that is used for system configuration. The
default position for all ten positions is Off.
Position Description Function
S1 iLO 3 Security Off = iLO 3 security is enabled.
On = iLO 3 security is disabled.
S2 Configuration
lock
Off = System configuration can
be changed.
On = System configuration is
locked.
S3 Reserved Reserved
S4 Reserved Reserved
S5 Password
protection
override
Off = No function
On = Clears power-on password
and administrator password
S6 Invalidate
configuration
Off = Normal
On = Clears NVRAM
S7 Reserved Reserved
S8 Reserved Reserved
S9 Reserved Reserved
S10 Reserved Reserved
To Next Page
Loading...
