Operations 26
2.
Extend the server on the rack rails until the server rail-release latches engage.
3. After performing the installation or maintenance procedure, slide the server into the rack by pressing
the server rail-release latches.
Remove the access panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: Do not operate the server for long periods with the access panel open or
removed. Operating the server in this manner results in improper airflow and improper
cooling that can lead to thermal damage.
To remove the component:
1. Power down the server (on page 25).
To Next Page
Loading...
