Hardware options installation 48
5.
Remove the DIMM baffle.
6. Install the DIMMs.
For configuration options, see "Memory configurations (on page 43)."
7. Install the DIMM baffle.
CAUTION: When installing the tray with the secondary processor memory board, be sure that
all DIMM latches on the primary processor memory board are in the fully-locked position.
Failure to do so results in damage to the primary processor memory board.
8. Install the tray.
9. Install the processor memory drawer cover.
10. Install the processor memory drawer.
11. Power up the server (on page 25).
To Next Page
Loading...
