HP dx2300 - Microtower PC - Computer Setup-Main

Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3 Computer Setup—Main
Option Description
Date (mm:dd:yy) Allows you to set system date.
Time (hh:mm:ss) Allows you to set system time.
SATA Port 1
SATA Port 2
SATA Port 3
SATA Port 4
For each, allows you to:
●
run HDD self-test for selected channel:
●
SMART Status Check
●
HDD Short Self-Test
●
HDD Extended Self-Test
●
auto-detect HDD size and head
●
set extended IDE drive on selected channel to:
●
None
●
Auto
●
set access mode on selected channel to:
●
Large
●
Auto
●
view:
●
Firmware
●
Capacity
●
Cylinder
●
Head
●
Precomp
●
Landing Zone
●
Sector
Onboard FDC Controller Disables/enables the floppy disk controller.
Drive A Allows you to set Drive A to:
●
None
●
1.44M, 3.5 in.
Halt On Allows you to set POST error behavior to:
●
All Errors
●
No Errors
4 Computer Setup (F10) Utility ENWW