HP dx2300 - Microtower PC Utility Guide

●
3E8/IRQ4
●
2E8/IRQ3
Onboard Parallel Port Allows you to select a setting for the onboard parallel port:
●
Disabled
●
378/IRQ7
●
278/IRQ5
●
3BC/IRQ7
Parallel Port Mode Allows you to select parallel port mode:
●
SPP
●
EPP
●
ECP
●
ECP+EPP
●
Normal
After AC Power Loss Allows you to select system power loss behavior:
●
On
●
Off
●
Last State
Wake on PCI Device
from S5
Disables/enables waking up from S5 by PCI device.
RTC Alarm Resume Disables/enables RTC (real-time clock) alarm.
Date (of Month) If RTC Alarm Resume is enabled, allows you to select the day of the month for resumption of RTC
alarm. (Set to 0 for every day.)
Resume Time
(hh:mm:ss)
If RTC Alarm Resume is enabled, allows you to select what time the RTC alarm will resume.
Table 4 Computer Setup—Advanced (continued)
6 Computer Setup (F10) Utility ENWW

HP dx2300 - Microtower PC Specifications

General

Audio	Integrated High Definition audio
Form Factor	Microtower
Processor	Intel Celeron, Intel Pentium 4, Intel Core 2 Duo
Memory	Up to 4 GB DDR2
Optical Drive	DVD-ROM, DVD+/-RW
Graphics	Intel GMA 950 integrated graphics
Networking	10/100/1000 Ethernet
Expansion Slots	PCI, PCI Express x1, PCI Express x16
Ports	USB 2.0, serial, parallel, PS/2, audio in/out
Operating System	Windows Vista, Windows XP Professional
Chipset	Intel 945G