8. Remove the display bezel (4).
The display bezel (kit includes camera privacy cover) is available using the following spare part numbers:
Models with a microphone module: L60617-001
Models with an HD camera: L60618-001
Models with an IR camera: L60619-001
Models with an IR camera and an ambient light sensor: L60620-001
9. Two dierent camera modules are available. Refer to the following procedure appropriate for your
computer if it is necessary to replace the camera module:
a. HD camera or microphone module
The camera privacy cover is available in the Plastics Kit as spare part number L60631-001.
Lift upward to disengage the module from the adhesive on the display enclosure (1), disconnect
the cable from the module (2), and then remove the module from the display (3).
68 Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
