7. Remove the bezel from the display assembly (4).
The display bezel is available using spare part number 730952-001 for HP EliteBook 840
models, 730953-001 for HP ZBook 14 models, and 730814-001 for HP EliteBook 850 models.
NOTE: In these steps, the display assembly will not be connected to the computer as shown in
the illustration.
8. If you need to remove the raw display panel, remove the four Phillips PM2.0×3.0 screws (1) that
secure the display panel to the display enclosure.
9. Lift and rotate the panel onto the computer (2).
The raw display panel is available using the following spare part numbers:
●
737657-001: (35.6-cm) 14.0-in, HD (1366×768)
●
737658-001: (35.6-cm) 14.0-in, HD+ (1920×1080)
●
737659-001: (35.6-cm) 14.0-in, FHD (1920×1080)
●
733684-001: (39.6-cm) 15.6-in, HD (1368×768)
●
733685-001: (39.6-cm) 15.6-in, FHD (1920×1080)
NOTE: In these steps, the display assembly will not be connected to the computer as shown in
the illustration.
Component replacement procedures
99
To Next Page
Loading...
