2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
Memory module
Description Spare part number
4 GB memory module (PC3, 12800, 1600-MHz) 691740-001
8 GB memory module PC3L 12800 1600Mhz Shared 693374-001
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
Component replacement procedures
37
To Next Page
Loading...
