EasyManuals Logo

HP EliteDisplay E231 User Manual

HP EliteDisplay E231
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Connecting the Cables
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Remove the cable management clip from the back of the stand by pressing inward on one side
of the clip (1) and pulling outward on the other side of the clip (2)
3. Depending on your configuration, connect either the DisplayPort, DVI, or VGA video cable
between the PC and the monitor.
NOTE: The monitor is capable of supporting either analog or digital input. The video mode is
determined by the video cable used. The monitor will automatically determine which inputs have
valid video signals. The inputs can be selected by pressing the Input button on the front panel or
through the On-Screen Display (OSD) feature by pressing the Menu button.
For analog operation, connect the VGA signal cable to the VGA connector on the rear of
the monitor and the other end to the VGA connector on the computer (cable provided with
select models).
Connecting the Cables 5

Other manuals for HP EliteDisplay E231

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP EliteDisplay E231 and is the answer not in the manual?

HP EliteDisplay E231 Specifications

General IconGeneral
Pixel pitch0.265 x 0.265 mm
Aspect ratio16:9
Display diagonal23 \
Vertical scan range50 - 76 Hz
Horizontal scan range24 - 94 kHz
Viewing angle, vertical160 °
Contrast ratio (dynamic)5000000:1
Contrast ratio (typical)1000:1
Display number of colors-
Viewing angle, horizontal170 °
Display brightness (typical)250 cd/m²
Supported graphics resolutions720 x 400, 1600 x 900, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1440 x 900 (WXGA+), 1680 x 1050 (WSXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
HDCPYes
USB hub version2.0
HDMI ports quantity0
USB Type-A downstream ports quantity3
Product colorBlack
Country of originChina
Market positioningBusiness
Pivot angle0 - 90 °
Tilt angle range-5 - 30 °
Panel mounting interface100 x 100 mm
AC input voltage95 - 265 V
Power consumption (max)36 W
Power consumption (standby)0.5 W
Power consumption (typical)33 W
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)242.4 mm
Height (with stand)469.9 mm
Weight (with stand)6100 g
Depth (without stand)51 mm
Width (without stand)544 mm
Height (without stand)329 mm
Weight (without stand)3900 g

Related product manuals