HP EliteDisplay E231 User Manual

Mounting the Monitor
The monitor panel can be attached to a wall, swing arm, or other mounting fixture.
NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.
1. Remove the monitor panel from the stand. Refer to Removing the Monitor Stand on page 15.
CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To
attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long
screws are required. Longer screws must not be used because they may damage the monitor. It
is important to verify that the manufacturer’s mounting solution is compliant with the VESA
standard and is rated to support the weight of the monitor display panel. For best performance, it
is important to use the power and video cables provided with the monitor.
2. To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing
arm plate and into the mounting holes on the monitor.
To attach the monitor to other mounting fixtures, follow the instructions included with the
mounting fixture to ensure that the monitor is safely attached.
3. Reconnect the cables to the monitor panel.
16 Chapter 2 Setting Up the Monitor

HP EliteDisplay E231 Specifications

General

Pixel pitch	0.265 x 0.265 mm
Aspect ratio	16:9
Display diagonal	23 \
Vertical scan range	50 - 76 Hz
Horizontal scan range	24 - 94 kHz
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Display number of colors	-
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	720 x 400, 1600 x 900, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1440 x 900 (WXGA+), 1680 x 1050 (WSXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
HDCP	Yes
USB hub version	2.0
HDMI ports quantity	0
USB Type-A downstream ports quantity	3
Product color	Black
Country of origin	China
Market positioning	Business
Pivot angle	0 - 90 °
Tilt angle range	-5 - 30 °
Panel mounting interface	100 x 100 mm
AC input voltage	95 - 265 V
Power consumption (max)	36 W
Power consumption (standby)	0.5 W
Power consumption (typical)	33 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	242.4 mm
Height (with stand)	469.9 mm
Weight (with stand)	6100 g
Depth (without stand)	51 mm
Width (without stand)	544 mm
Height (without stand)	329 mm
Weight (without stand)	3900 g