HP EliteDisplay E232e User Manual

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP EliteDisplay E232e 23-inch Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
Batteries
All types including standard alkaline and lithium coin
or button style batteries
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers

HP EliteDisplay E232e Specifications

General

Screen Size	23 inches
Resolution	1920 x 1080
Panel Type	IPS
Brightness	250 cd/m²
Contrast Ratio	1000:1
Aspect Ratio	16:9
Swivel	Yes
Height Adjustment	Yes
Pivot	Yes
Color Support	16.7 million colors
VESA Mount	100 x 100 mm
Power Consumption	25 W (typical)
Response Time	5 ms
Viewing Angle	178° horizontal; 178° vertical
Video Inputs	DisplayPort, HDMI, VGA
USB Ports	USB 3.0

Summary

Items Requiring Selective Treatment

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

Components classified as requiring selective treatment, with a surface greater than 10 sq cm.

Batteries

All types of batteries, including standard alkaline and lithium coin or button style batteries.

Mercury-containing components

Components containing mercury, such as lamps and display backlights.

Liquid Crystal Displays (LCD)

LCD panels with a surface greater than 100 sq cm, including those with gas discharge lamps.

Cathode Ray Tubes (CRT)

Components identified as Cathode Ray Tubes (CRT).

Capacitors / Condensers

Capacitors or condensers, including those containing PCB/PCT, measuring over 2.5 cm.

External electrical cables and cords

Electrical cables and cords that are external to the main product assembly.

Gas Discharge Lamps

Lamps that utilize gas discharge for illumination.

Plastics with Brominated Flame Retardants

Plastics weighing over 25 grams containing Brominated Flame Retardants.

Components with Toner and Ink

Parts containing toner and ink, including liquids, semi-liquids, and gel/paste.

Components and waste containing asbestos

Materials and components confirmed to contain asbestos.

Components with Refractory Ceramic Fibers

Parts and materials containing refractory ceramic fibers.

Components with Radioactive Substances

Parts and materials that contain radioactive substances.

Tools Required for Disassembly

Crossing Screw Driver M3

A Phillips head screwdriver, size M3, for disassembly tasks.

Crossing Screw Driver M2

A Phillips head screwdriver, size M2, for disassembly tasks.

Product Disassembly Process

Initial Setup and Stand Removal

Lay the monitor flat and remove the stand.

Back Cover and Internal Connections Removal

Remove screws, then the back cover, keypad line, tapes, and LED line.

Chassis and Panel Assembly Removal

Remove foils, tape, LVDS, chassis ASM, panel, bezel, and top chassis mylar.

Keypad and USB Components Removal

Unlock screws to remove keypad, USB cover ASM, USB line, and USB board.

PCBA and Internal Components Removal

Unlock screws to remove mylar, PCBA, lines, and rubber caps.