HP ElitePad 1000 G2 - Connecting to a Network; Wireless Network Connection

QuickSpecs
HP ElitePad 1000 G2
Technical Specifications
Worldwide — Version 1.1 — February, 2014 Page 12
* All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary
either higher or lower.
STORAGE AND DRIVES
64 GB embedded Multi
Media Card (eMMC)
Drive Weight
Up to 2g
Capacity
64 GB
Height
1.4 mm
Width
12 x 16 mm
Interface
MMC protocol v4.51
Performance
Sequential Read : 100MB/s (min.)
Sequential Write : 40MB/s (min.)
Features
Embedded Multi Media Card v4.51 compliant, TRIM, Secure Erase, CMD5
support, Partition management, Enhanced Write Protection, HS200
support
128 GB embedded Multi
Media Card (eMMC)
Drive Weight
Up to 2g
Capacity
128 GB
Height
1.4 mm
Width
12 x 16 mm
Interface
MultiMediaCard Bus
Performance
Sequential Read : 100MB/s (min.)
Sequential Write : 40MB/s (min.)
Features
Embedded Multi Media Card v4.51 compliant, TRIM, Secure Erase, CMD5
support, Partition management, Enhanced Write Protection, HS200
support
SECURITY
Near Field
Communications (NFC)*
NFC Specifications
ISO/IEC 14443A, ISO/IEC 14443B PCD 106 kbps to 848 kbps
ISO/IEC 14443A, ISO/IEC 14443B PICC 106 kbps to 424 kbps
ISO/IEC 15693/ICODE reader
NFC-IP1 and NFC-IP2 protocols, 106 kbps to 424 kbps
MIFARE reader encryption mechanism
NFC Forum Types 1-4 card reader
Supported Host
Interfaces
I2C
Automatic wakeup from Standby via host control interface
Dimensions
0.18 x 0.18 x 0.04 in (4.5 x 4.5 x 0.9 mm)
Frequency Band
13.56 MHz ISO Band
RF Output Voltage
3.3 V max
150 mA max (@3.0V output)
Power Consumption
1.5 W (max)
Antenna
Built-in