11. Insert a screwdriver into the release hole to depress the release button (2), and then pull the column up
and o of the head unit (3).
12. Remove the column printer door cover:
a. Open the printer door (1).
b. Remove the two Phillips head screws with the lock washers and bushings (2) from the top and
bottom of the door cover.
c. Use a small at head screwdriver to pry the retaining tab from behind the door cover hook (1).
d. Press the door cover hook out of the slot in the door frame (2).
NOTE: You may need to use a at head screwdriver to help disengage the hook from the slot.
Removing and replacing the column printer 37
To Next Page
Loading...
