HP Entry-Level User Manual

QuickSpecs
HP Entry-Level Power Supplies
Overview
c04390737 – DA – 15030 Worldwide — Version 2 — December 1, 2014
Page 2
Models
HP Entry-Level
Power Supplies
HP ProLiant Gen9 Essential Server Power Supplies – Non-Redundant
NOTE: Supports Silver-level efficiency (89%) with a standard C14 inlet connector. No support for HP
Power Discovery Services. Only compatible with select HP ProLiant Gen9 Essential servers.
HP 550W FIO Power Supply Kit
NOTE: This is a Factory Installed Option (FIO) only.
730941-B21
HP ProLiant Gen9 Essential Server Power Supplies – Redundant
NOTE: Supports Gold-level efficiency (92%) with a standard C14 inlet connector. No
support for HP Power Discovery Services. Only compatible with select HP ProLiant
Gen9 Essential servers.
HP Server Redundant Power Supply Backplane Kit
HP 800W Gold (Redundant)/900W (Non-Redundant) AC Power Input Module
NOTE: Each Redundant Power Supply Backplane can support up to two (2) power
input modules. Non-redundant configurations with a single power input module
installed can provide up to 900W (200 – 240VAC) and up to 550W (100 – 127VAC) of
power. Redundant configurations with two power input modules installed can
provide up to 800W (200 – 240VAC) and up to 550W (100 – 127VAC) of power.
745813-B21
744689-B21

HP Entry-Level Specifications

General

Type	ATX
Efficiency	80%
Input Voltage	100-240V
Input Frequency	50/60Hz
Output	+3.3V, +5V, +12V, -12V, +5Vsb
Cooling	80mm fan
Dimensions	150mm x 140mm x 86mm
Model	HP Entry-Level
Connectors	24-pin ATX, SATA, Molex
Weight	1.5kg