3. Close the scanner lid.
Open the HP printer software (Windows)
After installing the HP printer software, depending on your operating system, do one of the following:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer
name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select
the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's name.
Sleep mode
●
Power usage is reduced while in the Sleep mode.
●
After initial setup of printer, the printer enters the Sleep mode after five minutes of inactivity.
●
The time to the Sleep mode can be changed from the control panel.
To set the Sleep mode time
1.
From the Home screen, touch
( Setup ).
NOTE: If you do not see the Home screen, press the Home button.
2. Touch Power Handling.
3. Touch Sleep.
4. Touch After 5 minutes, or After 10 minutes, or After 15 minutes.
Auto-Off
This feature turns the printer off after 2 hours of inactivity to help reduce energy use. Auto-Off turns the
printer off completely, so you must use the Power button to turn the printer back on. If your printer
supports this energy saving feature, Auto-Off is automatically enabled or disabled depending on printer
capabilities and connection options. Even when Auto-Off is disabled, the printer enters Sleep mode after the
designated time of inactivity to help reduce energy use.
ENWW Open the HP printer software (Windows) 11
To Next Page
Loading...