Sleep mode
●
Power usage is reduced while in the Sleep mode.
●
After initial setup of printer, the printer will enter the Sleep mode after five minutes of inactivity.
●
The time to the Sleep mode can be changed from the control panel.
To set the Sleep mode time
1.
From the Home screen, touch
( Setup ).
NOTE: If you do not see the Home screen, press the Home button.
2. Touch Power Handling.
3. Touch Sleep.
4. Touch After 5 minutes, or After 10 minutes, or After 15 minutes.
16 Chapter 2 Get started ENWW
To Next Page
Loading...