Load media
Select a paper size to continue.
To load small-size paper
1. Pull out the photo tray.
Slide the paper-width guides outward, and then remove any previously loaded media.
If you do not see the photo tray, remove the output tray from the printer.
2. Load paper.
●
Insert a stack of photo paper into the photo tray print side down.
●
Slide the photo paper forward until it stops.
●
Slide the paper-width guides inward until they stop at the edges of the paper.
3. Push the photo tray back in.
4. Change or retain the paper settings on the printer display.
To load full-size paper
1. Pull out the paper tray, slide the paper-width guides outward, and then remove any previously
loaded media.
ENWW Load media 11
To Next Page
Loading...