9.
If it is necessary to replace the display panel cable:
CAUTION: Be sure the work surface is clear of all tools, screws, and computer components
before turning the display panel upside down on the work surface.
a. Turn the display panel upside down, with the top edge toward you.
b. Release the adhesive support strip (1) that secures the display panel cable connector to
the display panel.
c.
Release the handle (2) that secures the display panel cable connector to the display panel.
d.
Disconnect the display panel cable (3) from the display panel. The display panel cable is
available using the following spare part numbers:
●
682055-001—Display panel cable for use only on computer models equipped with an
FHD display assembly
●
682057-001—Display panel cable for use only on computer models equipped with an
FHD display assembly and an Intel processor
●
682054-001—Display panel cable for use only on computer models equipped with an
HD display assembly
●
682056-001—Display panel cable for use only on computer models equipped with an
HD display assembly and an Intel processor
10. If it is necessary to replace the webcamera/microphone module:
a. Release the grounding strip (1) that secures the webcamera/microphone module to
the display enclosure.
100 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
