b.
Remove the display speakers (2) from the display enclosure. The display speakers are
available using spare part number 682096-001.
13. If it is necessary to replace the wireless antenna cables and transceivers:
a. Release the wireless antenna transceivers (1) from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided tape.)
b. Release the wireless antenna cables from the clips (2) built into the display enclosure.
c. Remove the wireless antenna cables and transceivers (3). The wireless antenna cables and
transceivers are available in the Antenna Kit, spare part number 682046-001.
Reverse this procedure to install the display assembly.
102 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
