HP f965w - 2 Getting Started; Initial Settings Configuration

13
2.6 Initial Settings
Before using the camcorder, we recommend you setup the correct Date
and Time.
Note:
Please note that if you tap the icon during recording, the system will stop recording and enter
OSD menu. Make sure the recording is already stopped then continue operating the menu.
2.6.1 Set the Date / Time
To set the correct date and time, do the following:
1. Press button to enter the OSD menu, and select
Setting
to
enter.
2. Press or button to select
Date/Time
and press
OK
button to enter.
3. Press or button to increase or decrease numbers and
press
OK
button for confirmation and enter to next column.
4. Repeat step 3 until all setting done.
Note:
To ensure the accuracy of the video file time, please reset the date and time when not in use over 7
days.