HP 19” Color Monitor User’s Guide
Setting Up Your Monitor
4 EnglishEnglish
Setting Up Your Monitor
Attaching the Tilt and Swivel Base
Your display has a tilt and swivel base. To fit the swivel base:
1
Turn the monitor on its side (never on the screen). Identify the front
of the base.
2
Locate the slots in the underside of the monitor.
3
Slide the base towards the front of the monitor until the locking tab
on the base clicks into place.
Where to Place the Monitor
Place your monitor on a flat sturdy surface. Ensure the operating site is
free from excessive heat, moisture, dust and sources of electromagnetic
fields. Sources of electromagnetic fields include transformers, motors,
and other monitors. Avoid exposing the monitor to direct sunlight.
1
2
3
p4815a.book Page 4 Monday, March 11, 2002 11:35 AM
To Next Page
Loading...
