Getting Acquainted
Reference Guide 1–19
Perform a Full Reset
A full reset is sometimes referred to as a “hard reset.” You should
perform a full reset when you want to clear all settings, programs,
and data from memory.
To perform a full reset:
Ä
CAUTION: If you perform a full reset, you will return to your default
settings and lose all information.
1. Press and hold the Power button 1.
2. Press the Reset button 2 on the side panel of the iPAQ
Pocket PC with the stylus.
3. Hold all buttons until the displayed image begins to fade
(approximately four seconds).
311757-001.book Page 19 Friday, October 11, 2002 12:02 PM
To Next Page
Loading...
