HP j6750 - Configuring Dced; Configuring Secd

113
TCL Functions
DCE TCL Examples
Example:
dcecp> tcl_dce_config_dceserver oddball gumby1 \
> global cell_admin -dce-
:
dcecp>
Configuring dced
tcl_dce_config_dced (hostname cellname sec_server)
The hostname parameter can be passed as either the full domain name (for
example, blech.ch.apollo.hp.com) or the short name (for example, blech).
Specify the cellname parameter without the /.../ in front. If you are
configuring the dced on a machine to be a client in an existing cell,
sec_server would be the name of the security server in that cell. If you are
configuring the dced on a machine to be its own cell, sec_server should be
the same as hostname. If you are configuring the local host into an existing
cell, you can pass “NULL” as the cellname if you would like the function to
internally figure out the name of the cell using the sec_server parameter.
Example:
dcecp> tcl_dce_config_dced oddball gumby1 oddball
:
dcecp>
Configuring secd
tcl_dce_config_secserver (hostname cellname \
> celladmin celladmin_pw)
The hostname parameter can be passed as either the full domain name (for
example, blech.ch.apollo.hp.com) or the short name (for example, blech).
Specify the cellname parameter without the /.../ in front. The dts_type
parameter should be one of ‘client’, ‘local’, ‘global’ or ‘none’. Choose your own
celladmin account name (usually ‘cell_admin’) and password.
Example:
dcecp> tcl_dce_config_secserver oddball gumby1 \
> cell_admin -dce-
:
dcecp>