HP j6750 - Dfs_Config Environment Variables

60
Running dce_config to Configure Enhanced DFS
dfs_config Environment Variables
dfs_config Environment Variables
dfs_config recognizes the following environment variables. If these
environment variables are set and exported, dfs_config will skip the
corresponding prompts for information when run in interactive mode.
Environment Variable Definition
AGG_DEV_NAME The device name of the aggregate to be
exported (for example, /dev/lvXX). Also
used as the device name for filesets.
AGG_FS_TYPE The type of the file system of the aggregate to
be exported. “native” means the native file
system (for example, UFS, HFS). “episode”
means the Episode (LFS) file system. Also
used as the file system type for filesets.
AGG_MOUNT_PATH The mount path of the aggregate (for
example, /usr/ users).
AGG_NAME The name to be used for the aggregate to be
exported (for example, user.jlw).
AGG_ID The unique numerical aggregate ID of the
exported aggregate.
CLIENT_CACHE_LOC “mem” means cache is in memory;“disk”
means cache is on the local disk.
CACHE_DIR_DISK The pathname of the directory to use for a
local disk cache (if one is used).
CACHE_SIZE_DISK The number of bytes to use for a local disk
cache (if one is used).
CACHE_SIZE_RAM The number of bytes to use for an in-memory
cache (if one is used).