Figure 8-13.  Displaying Policy Resources
HP Switch(config)# show policy resources
 Resource usage in Policy Enforcement Engine
        |    Rules    |  Rules Used
  Slots |  Available  | ACL | QoS | IDM |  VT | Mirror | PBR | Other |
  ------+-------------+-----+-----+-----+-----+--------+-----+-------|
    A   |        3014 |  15 |  11 |   0 |   1 |      0 |   0 |    3  |
        |    Meters   |  Meters Used
  Slots |  Available  | ACL | QoS | IDM |  VT | Mirror | PBR | Other |
  ------+-------------+-----+-----+-----+-----+--------+-----+-------|
    A   |         250 |     |   5 |   0 |     |        |     |     0 |
        | Application |
        | Port Ranges |  Application Port Ranges Used
  Slots |  Available  | ACL | QoS | IDM |  VT | Mirror | PBR | Other |
  ------+-------------+-----+-----+-----+-----+--------+-----+-------|
    A   |          14 |   2 |   0 |   0 |     |      0 |   0 |     0 |
 0 of 8 Policy Engine management resources used.
 Key:
 ACL = Access Control Lists
 QoS = Device & Application Port Priority, QoS Policies, ICMP rate limits
 IDM = Identity Driven Management
 VT  = Virus Throttling blocks
 Mirror = Mirror Policies, Remote Intelligent Mirror endpoints
 PBR = Policy Based Routing Policies
 Other = Management VLAN, DHCP Snooping, ARP Protection, Jumbo IP-MTU,
         Transparent Mode.
 Resource usage includes resources actually in use, or reserved for future
 use by the listed feature.  Internal dedicated-purpose resources, such as
 port bandwidth limits or VLAN QoS priority, are not included.
Includes hardware resources used by classifier-
based QoS, mirroring, and PBR policies that are 
currently applied to interfaces on the switch.