Need help?Do you have a question about the HP JG927A and is the answer not in the manual?
General| Model | JG927A |
|---|---|
| Switching Capacity | 176 Gbps |
| Layer | Layer 3 |
| Input Voltage | 100-240 VAC, 50/60 Hz |
| MAC Address Table Size | 32, 000 entries |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Ports | 4 x 10G SFP+ ports |
| Memory and Processor | 512 MB flash |
| Packet Buffer Size | 11.25 MB |
| Jumbo Frame Support | Up to 9220 bytes |
| Operating Humidity | 10% to 95% non-condensing |
Essential safety guidelines to prevent equipment damage and bodily injury during installation.
Specifies indoor use, clearance for ventilation, rack stability, and grounding for the switch.
Details temperature, humidity, and cleanness requirements for optimal switch operation and lifespan.
Guidelines to prevent adverse effects from EMI, including power filtering and cable selection.
Step-by-step instructions for mounting the switch using specific bracket types in a standard rack.
To Next Page
