Need help?Do you have a question about the HP JG924A and is the answer not in the manual?
General| Model | JG924A |
|---|---|
| Category | Switch |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| PoE Power Budget | 370W |
| Layer | Layer 3 |
| MAC Address Table Size | 32, 000 entries |
| Input Voltage | 100-240 VAC |
| Ports | 4 x SFP+ |
| Jumbo Frame Support | Yes |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Operating Humidity | 10% to 90% (non-condensing) |
To avoid equipment damage or bodily injury, follow safety recommendations before installation.
Ensure the installation environment meets requirements for ventilation, stability, and grounding.
Maintain specific temperature and humidity levels to prevent insulation issues and material corrosion.
Minimize dust, salts, acids, and sulfides to prevent electrostatic adsorption and corrosion.
Use guidelines like proper grounding and shielded cables to mitigate EMI effects on the switch.
Follow steps to attach mounting brackets to the switch and secure it in a 19-inch rack.
Prepare the environment for configuring the switch, including console connection.
Configure terminal settings such as baud rate and data bits for console access.
Follow the steps for verification and powering on the switch after installation.
Information on how to reach HP support for assistance with the switch.
Access links to relevant documents, websites, and conventions for further details.
Understand standard conventions used throughout the documentation for clarity.
Visual overview of various HP 1920 switch models.
Details on chassis dimensions, weights, and port configurations.
Information regarding AC input voltage, RPS compatibility, and power consumption.
Description of Power, Copper port, Fiber port, and RPS LEDs.
To Next Page