HP L1502 - Page 58

GENERAL PRODUCT SPECIFICATION
Go to cover page
15 inch LCD MONITOR
TYPE : AJ6S50/02
BRAND : HP(L1502)
8639 000 15367
2004-04-23
2004-04-23
590
9
18
HP WU
HP L1502 LCD58
ADVANCED OSD, described in Table 8. The Advanced Menu will
remain the default OSD upon subsequent power-ups of the monitor
until the Basic Menu option is selected or until “factory reset” is
selected.
4.1.2 Bezel OSD Button Hot Keys
Menu button ( ), shall be hot-key for OSD Menu Exit
The Minus ( - ) button shall be a hot-key for the Auto-Adjustment
process.
4.2 Factory Reset
This function, when selected and confirmed, shall replace previously
saved user settings with the factory preset values, but just for the
mode in operation at the time. If the current mode is a user mode
(not one of the presets), a Factory Reset will delete all user settings
for this mode, but will not change any user settings for other presets,
nor will any other user modes be affected. The functions which are
reset are indicated in the menu tables. Upon reset, the basic menu
mode shall be selected.
Note that the Factory Reset control will also set Brightness, Contrast,
and Color Temperature to their factory default values.
The monitor shall do an automatic Auto-Adjustment after a Factory
Reset. If the Horizontal / Vertical image Pos and Clock /Phase
adjustments are different from Factory Reset, these values will be
stored in new user mode.
4.3 OSD Definitions
Philips follow HP’s requirement to create OSD, and HP approved
the OSD sample, if any deviation between specification and
sample, should follow up the MP sample as standard.
The OSD menu structures are given below. Factory defaults and
which items are affected by the factory reset function are indicated
in the Advanced OSD Menu table.
TABLE 7
BASIC OSD MODE CONFIGURATION
Mode Menu
Menu Level 1 Menu Level 2 Menu Level 3 Factory
Brightness ADJ Scale Y(FD
=
Contrast ADJ Scale Y(FD
Auto Adjustment Show “Adjusting… ” message Y(no
Advanced Menu Refer to table 8
Exit
"
"
"
"