HP L1940T - 3 Operation Instructions; General Instructions; Control Button

19" LCD Color Monitor HP L1940T
6
3. Operation Instructions
3.1 General Instructions
Press the power button to turn the monitor on or off. The other control buttons are located at front of the panel. By
changing these settings, the picture can be adjusted to your personal performance.
-
The power cord should be connected.
-
Connect the video cable from the monitor to the computer VGA card.
- Press the power button to turn on the monitor, the power indicator will light up to Green.
3.2 Control Buttons
- Power Indicator:
Green — Power On mode.
Orange — Power Saving mode.
Blank —Power Off Mode.
Auto Adjust: Activates the auto adjustment feature for optimum image.
Menu: Opens the ON-Screen Display (OSD) menu.
Minus (–) : 1、If OSD is on, press to navigate backward through the OSD menu features and decrease adjustment
levels.
2、If OSD is off, press to enable the DVI signal input (available on select models).
plus (+) : 1、If OSD is on, press to navigate forward through the OSD menu features and increase adjustment
levels.
2、If OSD is off, press to enable the VGA signal input.
Power: Turns the monitor on or off.