3 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Rear Components
Figure 3-1 Rear Components
Component Function
1 USB Downstream
Connectors
Connects optional USB devices to the monitor.
2 USB Upstream
Connector
Connects the monitor USB hub to a host USB port/hub.
3 DVI-D Connector Connects the DVI-D signal cable to the monitor.
4 VGA Connector Connects the VGA signal cable to the monitor.
5 Cable Lock Provisions Provides slots for use with cable security locks.
6 AC Power Connector Connects the AC power cord to the monitor.
ENWW Rear Components 5
To Next Page
Loading...
