To Next Page

To Previous Page

Select This Option To Do This

Display Off Sets the time when the monitor automatically turns off. This does not affect

screen saver operation, which has priority over the HP Display LiteSaver.

Display On Sets the time when the monitor automatically turns on. This does not affect

screen saver operation, which has priority over the HP Display LiteSaver.

Activity Extension Sets the time in minutes before the monitor turns off if there is any keyboard or

mouse activity after the Display Off time is reached. If the keyboard or mouse is

used, then HP Display LiteSaver waits until the set amount of time before turning

the display off again. Set to 0 to disable. If disabled, the monitor will turn off as

soon as the Display Off time is reached, regardless of keyboard or mouse activity.

Show 1 minute Display Off Notice Displays a popup message in the system tray 1 minute before the monitor is

turned off by HP Display LiteSaver

Status Shows the time until the monitor is next due to be turned off by HP Display

LiteSaver

OK Stores the current settings and minimizes HP Display LiteSaver to the System Tray

Cancel Restores the previous settings and minimizes HP Display LiteSaver to the

System Tray. HP Display LiteSaver will continue to run.

Help Opens the online help file

Exit Exits and closes the HP Display LiteSaver. It will no longer control the monitor

power until it is next run.

View HP Display LiteSaver Readme on the CD for additional information on how to configure HP

Display LiteSaver.

sRGB Support

The monitor is designed to support sRGB for color management, which adapts to the color standards

used in the image technology industry.

To take advantage of the sRGB support, you need to change the monitor’s color temperature to

sRGB and install the sRGB color profile (ICM) file.

NOTE The sRGB color temperature preset improves the color accuracy of sRGB images on

the computer monitor, but some color variation may still occur.

Changing the Color Temperature

1. Press the Menu button on the front panel of the monitor to launch the Main Menu of the OSD.

2. Select Advanced Menu to access all options in the Main Menu.

3. Select Color to display the Color Temperature menu.

4. Select sRGB.

5. Select Save and Return to exit the menu.

Table 4-3 HP Display LiteSaver Configuration Options (continued)

ENWW sRGB Support 31

Questions and Answers:

Need help?

Do you have a question about the HP L2045W and is the answer not in the manual?

HP L2045W Specifications

General

Pivot angle	0 - 90 °
Plug and Play	Yes
Tilt angle range	-5 - 30 °
Height adjustment	-
Panel mounting interface	100 x 100 mm
Pixel pitch	0.258 x 0.258 mm
Aspect ratio	16:10
Display diagonal	20.1 \
Display resolution	1680 x 1050 pixels
Vertical scan range	50 - 76 Hz
Horizontal scan range	24 - 93 kHz
Contrast ratio (typical)	800:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	160 °
Display brightness (typical)	300 cd/m²
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	2 W
Power consumption (typical)	60 W
Storage temperature (T-T)	-34 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Certification	Australian ACA Approval, Canadian Requirements/CSA, CE Marking, CISPR Requirements, Energy Star Compliant, German Ergonomic (TUV and GS Mark), ISO 9241-3, 7, 8 VDT Guidelines, ISO 13406-2 Pixel Defect Guidelines, MPR-II Compliant, PC2001 Certified, S. Korea
Product color	Silver
Country of origin	China
USB hub version	2.0
HDMI ports quantity	0
USB Type-A downstream ports quantity	3

Weight and Dimensions