Technical Specifications
IntelliTouch Specifications
Sealing Unit is sealed to protect against splashed
liquids, dirt, and dust.
Optical Light Transmission (per
ASTM D1003)
up to 92%
Visual Resolution All measurements made using USAF 1951
Resolution Chart, under 30X magnification,
with test unit located approximately 1.5 in
(38 mm) from surface of resolution chart.
Clear surface: Excellent, with no noticeable
degradation.
Antiglare surface: 6:1 minimum.
Gloss (per ASTM D2457 using a
60- degree gloss meter)
Antiglare surface: curved or flat: 95 ± 15
gloss units or 65 ± 15 gloss units; Clear
surface: N/A
Environmental Chemical Resistance The active area of the touchscreen is
resistant to all chemicals that do not affect
glass, such as:
Acetone
Toluene
Methyl ethyl ketone
Isopropyl alcohol
Methyl alcohol
Ethyl acetate
Ammonia-based glass cleaners
Gasoline
Kerosene
Vinegar
Electrostatic Protection (per EN 61
000-4-2, 1995)
Meets Level 4 (15 kV air/8 kV contact
discharges).
B–4 User Guide
To Next Page
Loading...
