To remove the drum drive assemblies
1. Remove the drum drive gears. See To remove the drum drive gears .
2. From the front of the printer, release the tabs on the link arm cover, shown in callout 1.
Figure 6-39.
Removing and replacing the drum drive assemblies (1 of 4)
3. Remove the link arm shown in callout 2.
Figure 6-40.
Removing and replacing the drum drive assemblies (2 of 4)
4. Remove the drum drive release plate shown in callout 3.
ENWW Internal components (left side) 215
To Next Page
Loading...