To remove the cartridge fan
Note
The cartridge fan is the vertical, front-most fan.
1. Remove the rear cover. See
Rear cover.
2. Remove the top cover. See
Top cover.
3. Remove the rear top cover. See
Rear top cover.
4. Disconnect the connector shown in callout 1.
5. Unhook the three tabs shown in callout 2.
6. Remove the fan from the fan holder.
Reinstallation tip
When reinstalling the cartridge fan, be sure that the arrow marked on the fan holder and the
arrow marked on the fan are pointing in the same direction.
Figure 6-85.
Removing and replacing the cartridge fan
248 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...