3. Remove the two screws shown in callout 3, and slide the left cover toward the back to
remove it. (One screw is on the front of the paper feeder, underneath the cover you
removed in step 2.)
Figure 6-87.
Removing and replacing the 500-sheet paper feeder left cover (2 of 2)
Paper feeder right cover
Use the following steps to remove the paper feeder right cover.
To remove the 500-sheet paper feeder right cover
1. Remove the cassette.
2. Remove the screw shown in callout 1, and remove the right front cover shown in callout 2.
Figure 6-88.
Removing and replacing the 500-sheet paper feeder right cover (1 of 2)
250 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...