3. Remove the two screws shown in callout 3, and slide the left cover toward the back to
remove it. (One screw is on the front of the paper feeder, underneath the cover you
removed in step 2.)
Figure 6-89.
Removing and replacing the 500-sheet paper feeder right cover (2 of 2)
Paper feeder pickup and feed rollers
The procedure for removing the 500-sheet paper feeder pickup and feed rollers is essentially
the same as for the cassette (Tray 2) pickup rollers. See
To remove the paper pickup and
feed rollers for instructions.
Paper feeder separation roller
The procedure for removing the 500-sheet feeder separation roller is essentially the same as
for the cassette (Tray 2) separation roller. See
To remove the cassette separation roller for
instructions.
Paper feeder pickup unit
Use the following steps to remove the paper feeder pickup unit.
To remove the paper feeder pickup unit
1. Remove the paper feeder left cover and right cover. See Paper feeder left cover and
Paper feeder right cover.
ENWW Optional 500-sheet paper feeder 251
To Next Page
Loading...