2. On the left side of the paper feeder, disconnect the two connectors shown in callout 1,
and remove the cables from the cable clip.
Figure 6-90.
Removing and replacing the paper feeder pickup unit (1 of 3)
3. On the right side of the paper feeder, disconnect the two connectors shown in callout 2,
and remove the cables from the cable guides.
Figure 6-91.
Removing and replacing the paper feeder pickup unit (2 of 3)
4. At the front of the paper feeder, remove the two screws shown in callout 3.
252 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...