5. Slide the pickup unit forward, then push it down to remove it.
Figure 6-92.
Removing and replacing the paper feeder pickup unit (3 of 3)
Reinstallation tip
Remove the paper cassette that is above the paper feeder pickup unit that you are
reinstalling. While inserting the pickup unit, lift up on the pickup roller to help the pickup
unit seat properly.
Paper feeder lifter drive unit
Use the following steps to remove the paper feeder lifter drive unit.
To remove the 500-sheet paper feeder lifter drive unit
1. Remove the paper feeder right cover. See Paper feeder right cover.
2. Disconnect the two connectors shown in callout 1, and remove the cables from the cable
clip.
ENWW Optional 500-sheet paper feeder 253
To Next Page
Loading...