EasyManua.ls Logo

HP Laser Jet 5550 - Page 291

HP Laser Jet 5550
558 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Control panel message Event
log error
message
Description Recommended action
DISK FILE
OPERATION FAILED
alternates with
Ready
For menus press
None The printer received a PJL file
system command that attempted
to perform an illogical operation
(for example, to download a file to
a non-existent directory).
1. Printing may continue.
2. Turn the printer off and then
back on.
3. If the message reappears,
there may be a problem with
the software application.
DISK FILE
SYSTEM IS FULL
alternates with
Ready
For menus press
None The printer received a PJL file
system command that attempted
to store something on the file
system but was unsuccessful
because the file system is full.
1. Use the HP Web Jetadmin
software to delete files from
the EIO disk drive and try
again.
2. To remove this message from
the display, turn the printer off
and then back on.
DISK IS
WRITE PROTECTED
alternates with
Ready
For menus press
None The file system device is protected
and no new files can be written to it.
1. To enable writing to the disk,
turn off write protection, using
HP Web Jetadmin.
2. To remove this message from
the display, turn the printer off
and then back on.
DOORS OPEN
TEST ABORTED
None A printer door has been opened
during a test. The test has been
aborted.
Close the door, and restart the test.
EIO DISK X
NOT FUNCTIONAL
For help press
None The EIO disk in slot X is not
working correctly.
Remove the EIO disk from the slot
indicated and replace with a new
EIO disk drive.
FLASH DEVICE
FAILURE
alternates with
Ready
For menus press
None A device failure has occurred on
the specified drive.
1. Printing may continue for jobs
that do not require the Flash
DIMM.
2. To remove this message from
the display, turn the printer off
and then back on.
3. If the message persists,
remove and re-install the
Flash DIMM.
4. If the message persists,
replace the Flash DIMM.
FLASH FILE
OPERATION FAILED
alternates with
Ready
For menus press
None The printer received a PJL file
system command that attempted
to perform an illogical operation
(for example, to download a file to
a non-existent directory).
1. Printing may continue.
2. Turn the printer off and then
back on.
3. If the message reappears,
there may be a problem with
the software application.
Table 7-2. Alphabetical printer messages (HP Color LaserJet 5500 models) (continued)
ENWW Alphabetical printer messages 269

Related product manuals