HP Laser Jet 5550 - Page 315

Control panel message Event
log error
message
Description Recommended action
Tray X
<TYPE> <SIZE>
Size specified by user
alternates with
Tray X
<TYPE> <SIZE>
To change type
Press
None The printer is reporting the current
configuration of tray XX. The tray
switch is in the CUSTOM position.
1. To change media type,
press
. Use and to
highlight the type, then press
to select.
2. To change the media size to
Letter, Letter-R, A4, A4-R,
Executive, B5 JIS, B5-R, A5,
A5-R, A3, 11 x 17, or Legal,
leave the tray switch in the
STANDARD position.
3. To change the media size to
other sizes, leave the tray
switch in the CUSTOM
position, adjust the media
guides against the media, and
close the tray.
4. Select the paper handling
menu from the control panel.
Configure the size for the tray.
TRAY X EMPTY
<TYPE> <SIZE>
alternates with
Ready
For menus press
None The specified tray is empty and
needs to be filled but the current
job does not need this tray to print
correctly.
Refill the tray at a convenient time.
TRAY X OPEN
For help press
alternates with
Ready
For menus press
None The specified tray is open or not
closed completely.
Close the tray.
TRAY X SIZE=
<SIZE>
For help press
alternates with
TRAY X SIZE=
<SIZE>
To change, move
switch in tray XX
None A non-detectable media size was
selected from the menu and the
tray switch is set to STANDARD.
The size selected from the menu
does not match the size detected
by the tray. Size detection occurs
when the tray switch is set in the
STANDARD position.
1. Adjust the side and rear
media guides against the
paper.
2. If the media used is Letter,
Letter-R, A4, A4-R,
Executive, B5 JIS, B5-R, A5,
A5-R, A3, 11 x 17, or Legal
sized, the tray switch should
be set to STANDARD. Set the
tray switch to CUSTOM for all
other media sizes. The tray
switch must be set before the
size can be selected from the
control panel.
3. Reset the paper size in the
paper handling menu.
Table 7-3. Alphabetical printer messages (HP Color LaserJet 5550 models) (continued)
ENWW Alphabetical printer messages 293