32 Chapter 2 - Removal and replacement Q1342-90910
Front cover
1 Remove the following assemblies:
z Toner cartridge, media tray, and cable pod. See “Toner cartridge”
on page 15 through “Cable pod” on page 17.
z Left side, back, right side, and top covers. See “Left side cover”
on page 18 through “Top cover” on page 29.
2 Close the toner cartridge door.
3 Loosen two screws (one shown in callout 1), one on each side of
the cover.
Figure 21. Remove the front cover mounting screws
2
1
To Next Page
Loading...