Q1342-90910 Errors 69
Note The cable pod downloads the firmware from the computer each time
you turn on the printer. If the cable pod does not receive the firmware
download from the computer, only the ready and fatal-error light
patterns can appear.
Hint The status lights can only display information about one printer state
at a time. The status lights display printer status information in the
following order: fatal errors, intervention-required error, continuable
error, and processing job.
The Ready and Attention lights are
illuminated. The printer is in a fatal error
state.
A fatal error message appears on the
computer screen. Follow the directions in
the message to clear the error. Possible
fatal errors are:
z Fuser error
z Laser/scanner error
z ECU communication error
z Formatter RAM or ROM error
z Scan buffer error
z Dynamic RAM controller error
z General fatal error
z Miscellaneous hardware error
Table 9. Status lights messages (continued)
Message Possible causes Solutions
To Next Page
Loading...