HP LaserJet 1100 - Page 25

EN Product Operation
: LaserJet 1100 control panel
25
Paper out
The printer is out of paper.
Load paper into the printer.
Memory out
The printer ran out of memory in
the middle of a print job.
The page being printed may have been too
complex for the memory capacity of the
printer.
●
See “Memory (DIMMs)” in the HP 1100
User Guide to add memory.
●
Press and release the
Go key
to print.
Reset/Printer initialization
The printer memory is being
reset and all previously sent
print jobs are being purged. Or,
a printer initialization is taking
place. All lights blink for 1/2 of a
second or longer if initializing.
No action is necessary. However, you can
reset the printer if you press and hold the
Go
key
for 5 seconds.
Fatal error
All lights are on.
●
Turn the printer off and then back on.
●
Push the Go key to see secondary light
pattern.
●
See Chapter 5, "Troubleshooting/
Maintenance” for details of fatal light
patterns.
Control panel light messages (continued)
Light status Condition of the printer Action