To Next PageTo Next Page
Need help?Do you have a question about the HP LaserJet 1150 Series and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Print Speed | Up to 19 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Memory | 8 MB |
| Processor Speed | 266 MHz |
| Paper Handling Input | 250-sheet input tray |
| Connectivity | USB 2.0 |
| Input Capacity | 250-sheet input tray |
| Output Capacity | 125 sheets |
| Media Sizes Supported | Letter, Legal, Executive, A4, A5, B5, Envelopes |
| First Page Out | 10 seconds |
USB interface cables with 'A' to 'B' connectors.
Flex cable connecting laser/scanner assembly and formatter PC board.
Assembly with 'Go', 'Ready', 'Attention' LEDs mounted on the front cover.
Assembly mounts to the upper front on the right side plate.
Assembly mounts on top of the print structure frame.
DC stepper motor drives rollers and fusing assembly via gear train.
Formatter PC board assembly mounts to the left side frame assembly.
Various power cords with different plug types and ratings for global use.
Paper sensor PC boards for detecting paper edge or out-of-paper conditions.
24VDC Solenoid engages the pick-up roller gear/clutch assembly.
Torsion springs provide grounding connections to the toner cartridge.
Torsion springs provide high voltage connection to the toner cartridge.
Torsion spring acts as electrical connection for transfer roller contact.
Tension and compression springs for various printer mechanisms.
Front, right, left, and rear covers, including cover inserts.
Toner cartridge door that folds down for access.
Rubber feet used for the rear of the printer base.
Connecting link for sliding linkage and toner cartridge access.
Support pan for engine controller PC board and printer bottom.
Screw kit containing various sizes for printer assembly.
Face-down delivery assembly with support frame and pressure rollers.
Bonds toner to paper with heat, mounts in the upper rear of the printer.
29 tooth gear mounts on the end of the pressure roller.
Tension and torsion springs for fusing assembly components.
Toner cleaning cloth for absorbing toner and cleaning spills.
LaserJet printer paper specification and service manuals.
Fuser bracket ('L' shaped) provides mounting support for the fusing assembly.
69 tooth gear mounts on a rod in the upper rear corner of the right side plate.
Dual gear assembly drives the paper feed roller gear.
Front guide assembly runs the width of the printer.
Left and right side plate assemblies for internal printer mechanism.
Paper feed guide assembly supports the transfer roller and contacts.
Assembly includes pick-up roller, paper feed roller, and separation pad.
Paper Pickup Roller and Transfer Roller assemblies.
Gear/clutch assembly for pickup roller, solenoid activated.
Roller and holder assembly with spring-loaded roller.
Lift plate assembly with paper width adjusters.
Separation pad assembly mounts on a spring loaded arm.
Assembly includes pick-up roller, paper feed roller, and separation pad.
Paper Pickup Roller picks up media from paper input tray.
Paper pick-up shaft assembly with cams and roller holder.
Compression springs for clutch, separation pad, and lift plate.
Rear cover assembly includes output tray; paper tray cover with width guides.
Printer input paper tray assembly with tray, lever, and arm.
Locates the fusing assembly within the printer.
Locates the engine control PC board.
Locates the LED control panel.
Locates the paper feed guide assembly.
Locates the toner cartridge door.
Locates the top cover assembly.
Locates the paper input tray cover.
Locates the paper input tray assembly.
Locates the paper pick-up assembly.
Shows the rear cover assembly and related parts.
Diagram showing the pick-up gear assembly components.
Diagram showing the front guide assembly.
Diagram showing the fan and airflow guide assembly.
Diagram illustrating the left side plate assembly.
Diagram illustrating the right side plate assembly.
Diagram of the paper pick-up assembly.
Diagram of the paper pick-up shaft assembly.
Diagram of the separation pad component.
Diagram of the roller holder assembly.
Diagram of the paper lift plate assembly.
Diagram of the paper feed guide assembly.
Diagram of the fusing assembly.
Diagram of the face-down delivery assembly.
Visual representation of the LaserJet 1150 screw kit.
